Many people are fond of beadwork, because almost everything can be made from it! Today I will introduce you to the manufacture of the Beaded Love Tree. To do this, we need thread floss, beads and wire 0.3 ml (all in two colors) and scissors.At this stage, we will need wire and red beads , and we are still laying off the white color. So, we cut off 15 cm of red wire and put 5 red beads on it. Move them to the middle and twist, as shown in the picture.Now we put 5 beads on one of the ends of the wire and spin them.[/L_REPEAT]
Put the 5 beads on again, only now on the other end of the wire and twist.Repeat all this while on our it will not have a branch on each side of 4 petals.We will need 15 of these.Working on the same pattern, we are doing 32 more things, only they should not be 4 petals each, but 3 each.
For one branch we will need 3 large branches and 6 small ones.Now take white beads and white wire. We should have 32 small twigs and 15 large ones. In the end, it will be like this:It's time to start forming the main 5 branches. Here's what we need:In order for our sprig to be plump, cut about 50 pieces of 10 centimeters of wire. Take the wire 0.4 ml thick. Getting to the formation of branches. We take a sprig that has 4 lobes each and we put a piece of wire on it with floss threads.Now we take a branch with 3 petals each and we attach it to the main branch. We put a piece of wire and wind it up.The distance should be small, approximately as in the picture.Do not forget, after every 2 sprigs, to thicken the main branch with pieces of wire. We add twigs, which have 3 petals each. Each side should have 4 branches of 3 petals. The last fifth branch takes 4 petals. You should have such a big branch.But we will have such a large branch, the remaining 4 branches will be made without 1 branch (on each side) of three petals. But the last branch must necessarily be of 4 petals. We will have 5 branches, the largest branch in the center. Repeat everything with white branches.Take the largest branch and attach a branch to itPrimatvaym each branch about 3-4 cm apart. Do the same thing with white branches. It will turn out like this.Straighten the branches and fasten them with wire. But I did a little differently.She took a plaster and coated them with branches. I also made a stand for our tree from gypsum. I painted the finished composition with simple paints and decorated it with flowers, which I also made from beads. That's the beauty I got !!!
>img src="https://sdelaysam-svoimirukami.ru/_nw/10/904-16.jpg" alt="Tree of Love" title="Tree of Love">
What to do if you do not want to grow up
Which wallpaper is better
What is autonomy
Can I drink coffee for pregnant
How to install the sight in World of Tanks
How to make glue