Wooden notebook stand
Materials and tools:
- bar, the width of the bar is equal to the width of the slats;
- wooden dowels;
- Drill and drill
- carpenter's glue;
- pencil and ruler.
First, determine the size of the laptop - the length and width.
Take the width of the laptop and put it 4 times on the slats. Saw off 4 pieces.
Next, take a bar and saw off from it 2 bars of 3-5 cm height (or necessary for you). We make a small tilt in the bars (see photo) - we saw off or grind down a file.
We mark the places for drilling holes into which we then insert dowels. Drill 4 holes of 2 for each rack.
Thoroughly grind with sandpaper slats.
Getting started assembling racks. Pour glue into the holes and hammer in wooden dowels.
Clamp or strut racks with scabs. We wait until the glue is completely dry.
With sandpaper we clean the surface of the racks from glue.
Let's make connecting slats. Saw off from the rail 2 segment length equal to the length of the laptop.
You can round off the edges of the rails, then carefully treat with sandpaper.
How to tie a gum
Stove for bath
Who do all married men want
What to wear with heels
New Year Topiary
What is a thriller
How to become more attractive for men - the best advice